G Scale Model Train Forum banner
1 - 1 of 13 Posts

· Registered
1,643 Posts
Posted By StanleyAmes on 05/12/2008 8:56 AM
Some caution is advised. The max voltage for the system per the standard is 22 volts DCC (although some systems do put out 24 volts) and large scale decoders should be speced to handle 27 volts. Anything over that and you are likely to fry components.
You might also want to check the national electrical code especially if you are in a damp environment.
As you might guess I do not recommend such a high voltage from a safety perspective.
Stan Ames

Gotta save that one.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.