G Scale Model Train Forum banner

QSI problems

1653 Views 4 Replies 4 Participants Last post by  aceinspp
I don't post very often but do read a lot.  I am inpressed the amount of knowledge here.  

I use track power with the Crest 10amp power supply and controler. 

I just installed the QSI Magnum Aristo PnP in one of my Dash 9's.  The first issue is when the loco first strarts moving it shutters, after a few seconds it works fine.  The second issue is if I put another Dash 9 on the track anywhere the QSI loco does not work, the sound comes on but it will not move.  Is this normal?  I have checked all the connections and they were fine.

On the plus side, the installation is super easy and the sound is great.

Thanks for your help,
1 - 2 of 5 Posts
I also have the studdering with my RS-3 at slow speed startup. I have the latest software version. What CV values do you recommend for 2,3,4, and 5. Any others to check. Thanks, Alan
Just checked Greg's website which has detailed info on programing QSI sound. Will give this a try. Alan
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.