G Scale Model Train Forum banner
1 - 1 of 1 Posts

· Old Senior Member
Joined
·
1,543 Posts
Hi Jim C.    I had the same problems with my GP-9.  so I turned my Eng.  around and ran it backwards in same direction as before.  It didn't  hang up going in the other direction.. So I took a look at the slider and found mine was bent up a little and not straight 90 degs or like a " L shape" 
I bent  that slider down a little so the slider would touch the out side of the slider to the rail.  And wouldn't fall in to the frogs wheel flange grove ( I call a ditch..laf.)   
  Now it doesn't derail anymore .. I also ck'ed my other USA Eng's. and they seem to be ok.. Just had problems with that GP-9 going  in forward  direction.. /DesktopModules/NTForums/themes/mls/emoticons/tongue.gif

Any way......... just an ideal.  I only have two LGB sw.  on my layout. rest are Aristo sw.   /DesktopModules/NTForums/themes/mls/emoticons/whistling.gifNoel
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top