For the past 2 years, I have demonstrated hands-free train operations at the HAGRS in K.C. using DCC. Thanks to the recently released black boxes by AirWire, I’ll be using battery power to throw the turnouts and power the Switcher next year.
Terry, the Activator's address is set with the rotary dials in the front of the unit, similar to setting the frequency on the decoder. The unit works very well and is very responsive. I still need to decide on the final battery to power the Linker. I'm using an 18 volt drill battery, but have to monitor the max voltage when I charge it to stay under the 18 volt input limit to the Linker.
Posted By paintjockey on 11/18/2008 2:24 PM
Does the activator then have 4 seperate addresses for each switch position? Or do you bring up the activator address then get to choose numbers's 1-4 or A-D?
In my case, I assigned the first Activator ( my only one) address #1. The four output taps then automatically become Switch #1 thru switch #4. If I acquired a second Activator, the address would be #2 and the output taps would automatically be #5 thru #8. When I want to throw switch #1, I push "sel 5", then enter the appropriate switch number, example: #1#. I then push "F1" or "F3" to open or close the switch. if I want to throw switch #2, I enter #2#. All the while I have control of the engine speed and direction. this is very similar to DCC, except I have to enter the # symbol before and after the switch number. To exit the accessory mode I push the "*" key.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
G Scale Model Train Forum
450.1K posts
25.7K members
Since 2007
A forum community dedicated to G scale model train owners and enthusiasts. Come join the discussion about collections, displays, models, styles, scales, reviews, accessories, classifieds, and more!