G Scale Model Train Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
658 Posts
The lights are LEDs. My experience with this engine is that the lights are wired with a common negative connection. This is backwards from most decoders. They require a common positive connection. I ended up rewiring the lights and installed my own current limiting resistors for the lights. I wired the number boards up so that they were on any time that either headlight is on.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top