Joined
·
285 Posts
Don't have one of those, but if like most LGB motor blocks, outer wires are motor? inner wires are track? Or is it the other way arround?
I either unscrew the plate and peak inside.
Or'''
REMOVE LOCO FROM RAILS, INPLUG CABLE, then apply track power to Either the inner or outer pair. One pair will make themotor run. That is the pair you want to connect the orange / gray wires from the decoder to. Orange goes to the right hand pin of that pair.
I either unscrew the plate and peak inside.
Or'''
REMOVE LOCO FROM RAILS, INPLUG CABLE, then apply track power to Either the inner or outer pair. One pair will make themotor run. That is the pair you want to connect the orange / gray wires from the decoder to. Orange goes to the right hand pin of that pair.
