G Scale Model Train Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
301 Posts
Discussion Starter · #1 · (Edited)
Hi,guys!
I finally got something to come on this forum and crow about.
I just bought the new Bachmann Big Hauler 4-6-0 "Flying Rio Grande" locomotive and matching tender.
It's slightly used (about 6 months according to the seller).
But it only cost me $458.47 with free shipping on Ebay.
Bachmann 91801 G Scale D&RGW #170 4-6-0 Steam Locomotive DCC & SOUND 22899918013 | eBay
And it comes with a Soundtraxx DCC system installed and ready to go!
Based upon the Soundtraxx website, this is their TSU-4400 that has been installed in the tender:
Soundtraxx Tsunami2 Digital Sound Decoder TSU-4400
My current DCC control system is an NCE Powercab starter set that is inadequate to control G Scale due to the power supply being limited to 1 amp.
Any recommendations for upgrading an NCE Powercab power supply for G Scale?
According to indormation I found on their website, a power booster can not be more than 3 amps,and 28 watts according to the NCE website.
Yet they make a Smart Booster 5 amp system to plug the controller into.
Did I miss something on their website?
Or will I have to buy a completely new DCC controller for this lovely new locomotive?
Let me know what you guys think.
Later!
Andrew
 

Attachments

· Registered
Joined
·
301 Posts
Discussion Starter · #3 ·
Thanks,Greg!
What do you think about the "new" Bachmann 4-6-0?
I haven't received it quite yet, and I'm looking forward to running it once I get the DCC controller issue resolved.
Later !
Andrew
 

· Registered
Joined
·
301 Posts
Discussion Starter · #5 ·
Thanks, Greg.
I can't wait to try out the new loco with that TSU-4400.
It's my first DCC G Scale locomotive,and I'm quite excited about it!
The forum being certainly is good news!
Andrew
 

· Registered
Joined
·
301 Posts
Discussion Starter · #11 ·
Hey, that is great news!
Job One when it arrives will be to take it partially apart so that I can lubricate the entire drive mechanism.
Even with the ball bearings added, it shouldn't be very different internally from previous versions.
I'll take ,and post,a few photos of the chassis with the plate removed for those who might be interested.
I use only Labelle products to lubricate all of the various locomotives, and rolling stock,of all the scales in my train collection.
I'll post next after the loco arrives ,which will likely be either much later in the week, or early next week, as the loco is still in Bogart , Georgia, according to the UPS tracking number at this time.
 
1 - 4 of 4 Posts
Top