[pdk]

null

 

[pdk]

I have a suggestion on my web site. Cheap and robust.

http://home.cogeco.ca/~daisybeach/

Cheers...pete

 

[pdk]

null

 

[pdk]

Posted By SE18 on 02/29/2008 9:35 AM
; surprised CA works well outside, Pete.



It doesn't in my experience, so, when it comes to switches, I only ever use it to keep the adjuster nuts from moving during assembly. Once outside, CA will hold everything in place until rust can take over and keep things from moving. Works like a charm.

I would never glue the point rails to the throw bar, if that's what you mean.

 

[pdk]

Posted By NBS2005 on 02/29/2008 9:40 AM
Thanks guys, the latch throws appear to be the ticket, cheap, simple, and sturdy. I'll need to find a drill press to drill out the bolt. Anyone from the Fort Collins G scalers post here and have a drill press?

Thanks again,

J


You're welcome, J. Note however that if you don't want to use my nifty patented slider adjustment system there are other ways to attach the throwbar to the barrel bolt. Therefore you don't need to drill out the barrel, requiring a drill press. Perhaps SE18 has some suggestions, as he appears to have used a method unlike mine.