G Scale Model Train Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
2,952 Posts
Not very elegant, but I made headlights for my LUD (Little Ugly Diesel) from half inch and quarter inch brass tubing. I sharpened the edge on another section of brass tubing and used it to cut the back and the lense from acetate sheet. The front cap on the headlight was simply cut and filed to shape.






Hope this helps,

David Meashey
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top