Joined
·
817 Posts
when using a DB200 as a booster, the track section that it drives will source up to 8 amps. However, the section that the DB150 drives will source only 5 amps, same as it is now.
If you use the DB150 as a command station only and drive the whole layout from a DB200, then you will get a little more headroom, but not a lot.
See
http://www.girr.org/girr/tips/tips5/dcc_tips.html
for some more info on DCC and Large Scale
If you use the DB150 as a command station only and drive the whole layout from a DB200, then you will get a little more headroom, but not a lot.
See
http://www.girr.org/girr/tips/tips5/dcc_tips.html
for some more info on DCC and Large Scale
