G Scale Model Train Forum banner
1 - 20 of 25 Posts

·
Registered
Joined
·
1,180 Posts
Discussion Starter · #1 ·
OK so here's the most recent project ive been working on- i recently aquired an accucraft s-12 0-6-0 switcher that was in need of some work, so it became the "victim" of this project. THe locomotive i am going to be buildiing is a baldwin 0-6-0 build for the M&PA. it will not be an exact model, but rather be close enough for my liking- heres some pictures so far

\
Maryland and Pennsylvania 30 live steam by nate heffner, on Flickr

Maryland and Pennsylvania 30 live steam by nate heffner, on Flickr


Maryland and Pennsylvania 30 live steam by nate heffner, on Flickr


Maryland and Pennsylvania 30 live steam by nate heffner, on Flickr
 

·
Lord of the Steam
Joined
·
620 Posts
That's a nice project Nate. Looking forward to seeing it finished.

Don't know if you have thought of this or not, but you might want to consider moving the fuel tank out of the cab and putting a larger one in the tender to get longer runs. Just a thought. I found that with my S-12 the fuel tank in the cab gets so warm during a run that you have to wait a good long time for it to cool off before you can get a full fill on it for another run.

Scott
 

·
Registered
Joined
·
1,180 Posts
Discussion Starter · #17 ·
1 - 20 of 25 Posts
Top