[AsterUK]

Ross

That's really interesting. Aster always say use Loctite 222 in the kit instructions but that type of Loctite is not always available except from specialist suppliers who don't normally supply on an individual basis.

I normally say "use any low strength thread lock" but now having read your comment i will only recommend Loctite 222. Maybe I have to stock it with Steam Oil and other sundries - oh well.

Andrew

 

[AsterUK]

I don’t want to get involved with the ‘hostilities’ in this discussion but I do have a couple of things to say about burning paint off chimneys (stacks).

1. To reduce the likelihood of paint loss from inside the chimney, wrap a Kleenex tissue round the electric suction fan base to make a cushion between fan and chimney.

2. Always read the Operating Instructions which are included with the model and kit for a purpose! They advise the use of an electric suction fan to get sufficient steam pressure prior to opening the steam blower on the loco. An electric fan has a gentle draft whereas using some kind of Vacuum pump may draw the fire too strongly and cause the paint to burn off an overheated smokebox and chimney.

Rod Blakeman: You mention in this thread that you have had paint loss from an Aster. Well talk to me Rod! Maybe I can suggest something! Paint should not be burning off. Friendly advice is always available from your Aster Distributor and a spare part too if required. It is very frustrating to read your negative comments about Aster when we could have probably sorted out the cause of your problem with a call or email.

Andrew