Joined
·
5,334 Posts
You will notice if you take the track connector of the rail that one end of the aristo connector is sloted and the other is fixed.
When I did was to cut a small length of rail 3 to 4 inches. I attached it to a piece of track corectly. I then removed the fixed screw. I then removed the short piece of track with the jointer in the right place You can then use it as a jig to get the hole in the right place.
When I did was to cut a small length of rail 3 to 4 inches. I attached it to a piece of track corectly. I then removed the fixed screw. I then removed the short piece of track with the jointer in the right place You can then use it as a jig to get the hole in the right place.
