G Scale Model Train Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter · #1 ·
I'v accumulated all the parts to R/C my Accucraft Sabrina - RCS R/C control system, Tx, Rx, 2 servos, on/off harness, also have a couple of servo mounts on hand, 2mm wire linkages with turnbuckles, a 4 AA battery box mount, and a 90 degree linkage gizmo which I'm told is for the throttle linkage.

Now all I need is a picture of the cab of an R/C'd Sabrina to see exactly how its all put together.
Can anybody help?
Thanks!

James
Grandview Light Railway
 

·
Registered
Joined
·
71 Posts
Discussion Starter · #3 ·
I have been looking at the Katie for ideas, but the cab equipment arrangements in the Sabrina are different. Sabrina reverser control is on the right side, and the gas tank is in the way for servo mounting. For the Sabrina throttle control there is a 90 degree lever that bolts to the floor in factory holes to the left of the burner - but where and how does the throttle servo mount? The lubricator is in the way for servo mount.
I've been told that several UK loco repair shops have installed R/C in Sabrinas, so it has been done, but no one, builders or loco owners have responded to picture requests.
 

·
Registered
Joined
·
71 Posts
Discussion Starter · #6 ·
Then I would suggest contacting Accucraft UK and ask them who has done the conversion. Accucraft UK would know or could recommend someone.
Contact Us | Accucraft UK Ltd

Charles M
Thank you Charles for that information. I've contacted Accucraft UK and I hope they aren't as proprietary with their information. For the life of me I can't imagine how that 90 degree bell crank gets used or is needed in the Throttle linkage, even though Accucraft put 4 mounting holes in the footplate for it...
 

·
Registered
Joined
·
71 Posts
Discussion Starter · #11 ·
No input on mounting servos, but my 2 pennies on batteries. I have RCS rx in my Ruby, started with alkaline batteries in a holder. Terrible life expectancy and started getting twitchy servos after 40 minutes of running, change batteries and all good. Got reachable 5 cell battery packs. Night and day difference. Run the train for 5 sessions of 1hr plus before I consider recharging.

If you're in the US Maxxpacks in Wisconsin is who I got mine from.

Thanks for the info! I've currently got rechargeable LiPo AA and AAA flat pack battery holders that fit onto the bottom side of the cab roof, like Roundhouse does. Problem with the Sabrina is its Safety Valve exits thru the front part of the cab roof, so the AA size will not fit there.
Where do you mount the battery pack in your Ruby?
 

·
Registered
Joined
·
71 Posts
Discussion Starter · #12 ·
James,
Here's a thought about your problem. In the past when Accucraft advertised models as having an R/C option ( Earl and Sealion) those models had to go to Accucraft UK to be fitted out. I had ordered a manual " Earl " after finding out the R/C would only be installed in Britain , and a 4 to 6 month delay in delivery. You have a kit of " parts " for R/C installation , with no instructions included. The parts you have could just as easily be for an R/C Aster model with no connection to a Sabrina at all. The fact that nothing seems to make sense in how it mounts and what should go where leads me to think this. The fact that the kit has no instructions included , seems to be very poor service for the money spent.
You are right, none of the R/C kit parts make any sense, except for the 90 degree bell crank which seems to fit the 4 factory holes in the footplate. But no idea which direction the bell crank should be mounted because the holes are symmetrical.
I got the R/C parts from Accucraft USA free of charge but with no instructions, as a concession for waiting 7 weeks for Accucraft USA to build a Peckett Kit for me. In the end, after filing a PayPal dispute, Accucraft USA had 3 RTR Pecketts shipped from the China factory and 2 more weeks later they sent me one of them.
I've been trying to contact the UK R/C installers for some pictures of their Sabrina R/C installs, but it seems to be some kind of UK Trade Secret that no one responds. See post #5 above.
 
1 - 7 of 7 Posts
Top