G Scale Model Train Forum banner

A new Bank

7780 Views 39 Replies 21 Participants Last post by  Russell Miller
Way back last century Model Railroader published an article on building a bank.

In that same century, I built a model based on that article, making some changes to make it easier to build.

Thanks to Richard Smith, I got a copy of that article and set about using it as a basis for a 1:20 model.
The prototype is in Hempstead, New York.

I decided that I liked the changes I had made last century when I made my original model.   I wanted something that looked like a bank, but the prototype was a little too fancy.   So, I ditched the fancy railing on the top, and the massive rectangular columns on either end.

I started thinking of how I might want to build this.   I really enjoyed building my textile mill with acrylic, so an acrylic based was a given.   I first thought about using acrylic columns, but Jean suggested I head over to Michaels and check the cake decoration section.   There I found some neat columns that were 7" high and would be just perfect.   Not only that, they were cheap - 4 for under $5!

I drew up a plan in TurboCAD and used the pictures of the columns to see how they might work.

Pleased with that look, I put in a call to Russ Miller at TAP Plastics.   We spent a short time talking about what I needed and spent more time discussing all sorts of issues with railroads outside. ;)
See less See more
1 - 1 of 40 Posts
Hmmm....Practicing architorture without a license? be carefull the AIA will be after you;)
The resident architects will be checking up on you, we might just make an artichoke of you yet./DesktopModules/NTForums/themes/mls/emoticons/w00t.gif

I'll check out the Micheals lead, I got a couple ideas myself that those columns would be good for./DesktopModules/NTForums/themes/mls/emoticons/satisfied.gif
See less See more
1 - 1 of 40 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.