Great pics, Doug. It give me some ideas for my planned sawmill. I have to think about whether to model some of the characters in the pics though!
-Brian
-Brian
A Modelgenic Old Time Sawmill
9
A month ago when myself and several other MLSers went in search of eastern narrow gauge steam, we visited the Cradle of Forestry near Asheville NC. This museum showing the development of forestry technology is funded by an endowment from the Vanderbilts.
During our walk through the forest surrounding the museum we came across a small "portable" sawmill that would make a great model. I did not measure or draw it but if anyone lives in western NC and goes to visit, maybe they could fill some blanks in that regard. We did take photos however, and here are some shots courtesy of Bruce Chandler, Ric Golding and Gaetan Charette.
The mill is powered by a steam tractor ...
![]()
![]()
The mill itself is complete but very small on a scale that modellers can cope with
![]()
The view of the runoffs where boards were stacked gives another perspective
![]()
Inside the mill, some details of the log carriage, the drive of the blade and the log carriage
![]()
![]()
![]()
Beside the mill under the eaves was a shingle cutter (we think!)
![]()
And the piece de resistance, behind the mill was what appears to be the prototype of the B'mann Climax!
![]()
This mill would make a fine model though it would be a challenge to build. the fact that it exists and is accessible for photos and measuring should make it easier.
Regards ... Doug
During our walk through the forest surrounding the museum we came across a small "portable" sawmill that would make a great model. I did not measure or draw it but if anyone lives in western NC and goes to visit, maybe they could fill some blanks in that regard. We did take photos however, and here are some shots courtesy of Bruce Chandler, Ric Golding and Gaetan Charette.
The mill is powered by a steam tractor ...
The mill itself is complete but very small on a scale that modellers can cope with
The view of the runoffs where boards were stacked gives another perspective
Inside the mill, some details of the log carriage, the drive of the blade and the log carriage
Beside the mill under the eaves was a shingle cutter (we think!)
And the piece de resistance, behind the mill was what appears to be the prototype of the B'mann Climax!
This mill would make a fine model though it would be a challenge to build. the fact that it exists and is accessible for photos and measuring should make it easier.
Regards ... Doug
1 - 1 of 17 Posts
1 - 1 of 17 Posts
