RE: new website....you turn the pages like a book Dean, good job, nice presentation. The pages flipped very quickly and the pictures were more than adequate even without enlarging them.... 17 May 2012 05:14 PM Figures and Accessories (0)

RE: Replacing Kadee trip Arms I have replaced trip pins that I have cutoff with trip pins from other KaDee couplers. After removing the old "cutoff" pin, mount the new pin in a vise, align the coupler head with the knuckle by inserting the unsplined end of the old pin in the top of the coupler and visually position the assembled...... 08 May 2012 11:32 AM Public Forum (0)

RE: Question about sound, etc. Put the sound unit and speaker in the tender. That's not a speaker in the smokebox, it's the ends of the boiler tubes.... 12 Apr 2012 08:59 AM Beginner's Forum (0)

RE: USAT S4 with AirWire Terry, I went with the mini speakers because of space constraints. Plus, putting the 2 speakers back to back in a box gives good sound reproduction.... 27 Feb 2012 12:09 PM RC/Battery Operations (0)

RE: Simulated Coal Nice job on the coalload Bill.... 27 Feb 2012 12:05 PM Rolling Stock (0)

USAT S4 with AirWire AirWire G2, Phoenix P5, Phoenix SP-MINI speakers, 14.8V 2800 mah Li-Ion battery, and RAM super-brite LEDs, all stuffed in the S4. Decals by Stan.                ... 27 Jan 2012 12:12 PM RC/Battery Operations (5)

RE: Train Show participation We have 15 to 20 members participating in setup and breakdown, with approximately 12 (including wives) present during show hours.... 25 Jan 2012 05:20 PM Large Scale Events (0)

RE: DCC and Phoenix Sound Rick, I think you're going to have to change the address of the P8 to match the address of the DG583AR. The default address of the P8 is 3.... 16 Jan 2012 10:30 AM DCC in Large Scale (0)

RE: Kadee question Good point Kevin, the lid of the "G" coupler is about .070 thick, so you could probably replace it with one of the .030 thick shims.... 15 Jan 2012 06:41 AM Beginner's Forum (0)

RE: Kadee question The pad on the USAT Beer Can Tank Car that I received at Christmas was too low by about .030. Not a problem with the #1 Kadee, since Kadee includes both .060 and .030 shims in the shim package. If you're going to use the "G" coupler, you're going to have to add a .030 washer to the bolster.... 14 Jan 2012 12:51 PM Beginner's Forum (0)