Ole Toad Frog
1st Class Member
Roasharon, Tx.
Foreman
Posts:173
Send Message
 | | 05/07/2008 11:05 PM |
| | I have one I would like to get working but I am not sure who, what, where and when? Any one help? | |
 | |
|
Curmudgeon
Foreman
Posts:328
Send Message
| | 05/08/2008 12:03 AM |
| I forget the voltage, but mine works on 12V.
There is a motor, gears, and a centrifugal clapper.
When you unbolt the bell, do the parts move by hand? | | | |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1517
Send Message
| | 05/08/2008 6:37 AM |
| | They have electronic ones around here. The one where UP crosses IL 176 sounds sick. Somebody needs to put it out of its misery. | |
I did it! 7 hours 25 seconds. I placed 31,083 out of 31,401 finishers.
 
Chicago Marathon You don't have to train or run, I'm taking care of that for you. | |
|
Ole Toad Frog
1st Class Member
Roasharon, Tx.
Foreman
Posts:173
Send Message
| |
Ole Toad Frog
1st Class Member
Roasharon, Tx.
Foreman
Posts:173
Send Message
| |
Greg Elmassian
1st Class Member
Carlsbad (San Diego), CA
Conductor
Posts:974
Send Message
| | 05/08/2008 2:29 PM |
| I have one (somewhere) just like that one. If it does not work according to the schematic, take it to an electrical friend, the circuit is very simple... you either have it wired wrong, or both coils or the contacts are out.
By the way, when the arm comes down to touch the magnets, the long springy thing should break contact. It looks like the arm is down and the contact is still contacting.
Regards, Greg | |
Be sure to visit my site, lots of technical tips and modifications, and you can search for topics and key words.
Click here for Greg's web site | |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1517
Send Message
| | 05/08/2008 3:39 PM |
|
Torby, ever hear a microprocessor (sp) one? Thing is you can not unless your out of the car and standing beside it!
Do you have to have shoes on? | |
I did it! 7 hours 25 seconds. I placed 31,083 out of 31,401 finishers.
Chicago Marathon You don't have to train or run, I'm taking care of that for you. | |
|
SteveC
Moderator
Conductor
Posts:803
Send Message
| | 05/08/2008 7:37 PM |
| Hey Toad William
I believe Greg is correct. From the pictures it looks like with the armature all the way down against the two solenoids there should approximately 1/16" between the item labeled 3 in the diagram displayed in the seventh picture down (i.e. Greg's springy thing) and the mating contact that moves up and down with the armature. To adjust for that 1/16" gap, first don't have any power applied to the bell, then loosen the screw labeled 5 in the diagram slightly. Then while holding the armature down against the two solenoids, tap the item labeled 2 in the diagram down, which is to the left of the screw (i.e. item 5) you just loosened, until you get the 1/16" gap. Then tighten the screw back down and double check that you still have the 1/16" gap.
Next locate the terminal block that has three posts, it's just to the bottom-left of the solenoids. The post on the far left, which has the one wire and connects to the bottom of the adjustable resistor, located up and slightly to the left. Is where you connect the positive lead of your power supply.
The middle post in the terminal block is where you connect the negative lead of your power supply.
If the speed of the bell ringing is to fast or to slow, I'm fairly sure you use the band on the adjustable resister.
To adjust the resistor, first disconnect the power then loosen the screw that holds the band going around the resistor, then slide the band up or down a little bit and retighten the screw, reattach the power and see what has happened. One way will cause the bell to ring faster, the other way will slow the ring down.
Hope the above works for you, if not then let us know.  | | | |
|
Ole Toad Frog
1st Class Member
Roasharon, Tx.
Foreman
Posts:173
Send Message
| | 05/08/2008 10:14 PM |
| Oh man, Steve, you gave me this info at night????  I will not be able to sleep....
This is GREAT!!!! I owe you a ??? and a hand shake!
Now @ 4:30am the bell shall toll  , I live in the woods but have nice people around me 
Let ya'll know next pm if it works.
William
AKA Toad
Did I remember to say I have a full fuction air raid siren, steam whistle, 2 light target and now this. Yeah, I am a kid!
Want a bell (17", I think) but dang they want way to much  | |
| |
|
Ole Toad Frog
1st Class Member
Roasharon, Tx.
Foreman
Posts:173
Send Message
| | 05/09/2008 9:49 AM |
| Update:
Bell rang fine, slow but it was on a slow ring and 12v!
The right stub is POS and far left stub is NEG. I used my truck battery to check and ya'll did not tell me to wear ear plugs 
Thanks guys,
Toad | |
| |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1517
Send Message
| | 05/09/2008 10:05 AM |
| | And now, you've gone dingy. | |
I did it! 7 hours 25 seconds. I placed 31,083 out of 31,401 finishers.
Chicago Marathon You don't have to train or run, I'm taking care of that for you. | |
|
SteveC
Moderator
Conductor
Posts:803
Send Message
| | 05/09/2008 10:07 AM |
| Hey William
That's great, glad you got things worked out. Sorry about the "ringing in the ears."  | | | |
|
Spule 4
Nashvegas, TN
Foreman
Posts:441
Send Message
| | 05/09/2008 11:11 AM |
| Mine runs best on the higher voltage range, and I have a second one to adjust (mechanically) as it does not ring but the clapper moves.
Also check for wasps nests this time of year if you keep them outside. | |
Garrett
"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium." | |
|
Ole Toad Frog
1st Class Member
Roasharon, Tx.
Foreman
Posts:173
Send Message
| | 05/12/2008 7:48 AM |
| Thank you all for answering my question/s. Have to say for $35.00 it is a nice bell from AT&SF!
Toad | |
| |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1517
Send Message
| | 05/12/2008 8:10 AM |
| | And less annoying than Marty's air horn! I jump every time he pulls that thing | |
I did it! 7 hours 25 seconds. I placed 31,083 out of 31,401 finishers.
Chicago Marathon You don't have to train or run, I'm taking care of that for you. | |
|
Ole Toad Frog
1st Class Member
Roasharon, Tx.
Foreman
Posts:173
Send Message
| | 05/12/2008 8:19 AM |
| | Yeah, need one of those too..... | |
| |
|