Has anyone lubed a keystone engine or BUDDY L ENGINE > Forums

Subject: Has anyone lubed a keystone engine or BUDDY L ENGINE

Forum Sponsored By: PCGRS

Email me when someone replies to this thread.

You are not authorized to post a reply.

Author

Messages

LOST AND CONFUSED User is Offline

Brakeman
Posts:22

Send Message

08/31/2008 1:42 PM
I picked up a Keystone set for a crazy low bid on ebay which included 40 feet of track and Engine with tender and 4 other cars for 100 dollars.I recieved it yesterday the previous owner stated it had less the 2 hours of run time on the engine.I was suprised to see it really had no signs of wear on the wheels and the sound tender is way better than a stock bachmann. I ran it very slowly for 20 minutes without a load it runs but it squeeks very lightly and I would like to properly lube it. So if anyone has experience with this engine please let me know. I am always grateful for any tips so thank you ahead of time.My wife is not impressed she likes Diesels but I still like the old steam type engines they were the most advanced engines of their time and had a lot of style put into their design I have posted this in the model form got only one response from person telling me to go to tips page for bachmann these are of a different design I think its called a mogel 2 guide wheels in front and 2 in back not like a bachmann 10 wheeler ,I read georges tips pages on it and can lube one in my sleep now.

Mik

Indiana, Pa
Foreman

Foreman
Posts:343

08/31/2008 5:02 PM
The general tips and techniques transfer across all makes and models. Biggest trouble I have is with engines with the round spring loaded wheel brushes (Lionel especially)... I generally lose one or two (sometimes for good) when I remove the bottom plate and they go flying to the other side of the room-- SPROING!!!

Mik Unsupervised children will be given espresso and a free puppy

You are not authorized to post a reply.

Forums > Forums > Public Forum > Has anyone lubed a keystone engine or BUDDY L ENGINE