| Author | Messages | |
Jerry Barnes
1st Class Member
Lexington, NE
Engineer
Posts:1016
Send Message
 | | 02/26/2008 9:55 PM |
| | Anyone have a couple of the spring loaded wipers that fit between the wheels and pickup power as they rub on the inside of the wheels? I'd like some. Jerry | |
Life is too short to take seriously. | |
| Dan Pierce
1st Class Member
South Eastern MA, USA
Foreman
Posts:338
Send Message
| | 02/27/2008 3:49 AM |
| | Make and model of engine would help us help you. | | | |
| toddalin
Foreman
Posts:423
Send Message
| | 02/27/2008 10:20 AM |
| I've been known to simply drill a couple small holes through the plastic trucks running fore/aft just inside the wheels and insert a piece of brass wire to rub on the inside of the wheels there. Solder a lead wire on after inserting the wire in-place.
Depending on how well you implement the idea, and how much pressure you put on the brass wire, it can work well, or work just OK and/or add a lot of drag. (Works well on my AccuCraft Goose, but not so good (too much drag) on a sound-equipped box car.) The advantage is that if you have any brass wire around, it is free to do. | | | |
|
| | You are not authorized to post a reply. |
|
| |
ActiveForums 3.7 |
|