| You are not authorized to post a reply. | |
|
| Author | Messages | |
frontman
Passenger
Posts:2
Send Message
 | | 04/04/2008 4:50 AM |
| Hi All,
I'm trying to figure out which light iron turnouts to use. I'm using micro engineering code 83 flextrack. Should
I go with the wood or pc turnouts? Which would look better with the track I'm using? This is my first layout and just trying to get it right. Thanks
| | | |
| Dwight Ennis
Moderator
Milpitas, CA
Engineer
Posts:1466
Send Message
| | 04/04/2008 7:39 AM |
| Micro Engineering now makes On30 #5 code 83 left and right turnouts to go with their On30 flex track. If you're worried about matching appearances, that may be your best choice. 
In terms of turnout operation, the ones you can build with the Fast Tracks system produce the smoothest operating turnouts I have ever seen.  | |
Dwight Ennis
Milpitas, CA
SA #21
http://www.SantaCruzLumberCo.com
 | |
| frontman
Passenger
Posts:2
Send Message
| | 04/04/2008 10:26 PM |
| Micro engineering was my first choice, but it seems everyone is out of stock.
| | | |
|
| | You are not authorized to post a reply. |
|
| |
ActiveForums 3.7 |
|