| You are not authorized to post a reply. | |
|
| Author | Messages | |
jmkling
1st Class Member
Brakeman
Posts:39
Send Message
 | | 04/26/2008 9:08 PM |
| | I have been able to stuff and I mean stuff Airwire receiver's, P5 sound boards, Speakers, Li-Ion Batteries all into the tender of the MMI K-27 and a PSC K-28. The K-28 was easier, since the brass tender was thinner and overall much longer than the K-27. I had to cut the Airwire board in have and use a connecting cable. Both have a false coal load over the Batteries. Both can run for quite a while, but until I start doing an indoor layout, I don't have exact run times. I use Airwire on my 1:20 scale K-28's so I like have one control system for all my engines, either the 1:20.3 size or the On3 size. I will see about some pictures later. | |
 Jon Kling
Manassas, VA
SA #461 | |
| jmkling
1st Class Member
Brakeman
Posts:39
Send Message
| | 04/27/2008 6:45 AM |
| Here are a few photo's
Here is the K-27 with the split board
I have changed the Battery to a three cell 11.1V 600 mAhr version with a coal load | |
Jon Kling
Manassas, VA
SA #461 | |
|
| | You are not authorized to post a reply. |
|
| |
ActiveForums 3.7 |
|