rpc7271
1st Class Member
Mesa, Az
Foreman
Posts:145
Send Message
 | | 06/12/2008 11:29 AM |
| | I am totaly pi**ed with the Aristo Li-ion batteries and am not going to buy any more. I have one 14.4 volt Li-ion battery I got from Batteryspace.com to use in an Airwire install. Now I am using the new QSI decoders and receiver. I was thinking of using 2 of the 14.4 volt LI-ion batteries in a battery car for a total of 28.8 volts and then setting the appropriate CV in the decoder for a max voltage of 24 volts. What does anyone out there think? | | | |
|
calenelson
Non-Paying Member
Foreman
Posts:392
Send Message
| | 06/12/2008 11:58 AM |
| I am an RCS user...I use 14.4 for most everything....I assume what voltage you don't "use" will simply be lost as "heat" as the battery is discharged/used....this is my simple understanding of battery power...the pros will have more to say!
cale | |
‘Course he isn’t safe. But he’s good. He’s the King I tell you. | |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1666
Send Message
| | 06/12/2008 2:55 PM |
| Careful!
Airwire turns to smoke easily on an overvoltage. A common size battery is nominally safe, but fresh out of a charger will kill the receiver.
What's the matter with your Aristo Lithium?
| |
 "If Christianity was something we were making up, of course we could make it easier. But it is not. We cannot compete, in simplicity with people who are inventing religions. How could we? We are dealing with Fact. Of course anyone can be simple if he has no facts to bother about."-- C. S. Lewis | |
|
Bill Swindell
1st Class Member
Martinez, CA
Foreman
Posts:174
Send Message
| | 06/12/2008 5:25 PM |
| Most engines run just fine on 14.4 volt batteries. If you are using AirWire receivers, you need to either use batteries that are under 18v when freshly charged or split the batteries to allow using less than 18 volts to run the electronics. The higher voltage can be used to power the motors.
If you are using a QSI, you may be able to use higher voltage. Using 28.8v batteries is probably excessive for any receivers. As was mentioned earlier, excess voltage is converted to heat in the receiver. Excess heat is never a good thing.
I believe your 14.4v Li battery is made up of 4 cells. If you really need more voltage, why not add a 2 cell Li battery to the 14.4 volt one. That would work well with most receivers. | |
Bill Swindell
Martinez, CA | |
|
rpc7271
1st Class Member
Mesa, Az
Foreman
Posts:145
Send Message
| | 06/13/2008 4:01 PM |
| | I'M NOT USING AIRWIRE. I got rid of all of my Airwire stuff. I am using the QSI Quantum decoders with their GWire receiver. QSI says the unit can handle up to 35 volts. I build battery cars and battery locomotives to hold the batteries and use the Aristo plugs to plug everything together. The Aristo Li-ion batteries work well for this but I have 8 out of 10 batteries crap and am tired of buying crap batteries and having to return them. Besides at $75.00 to $100.00 a piece ther are better values out there. | | | |
|
billsharron
1st Class Member
New Truxton, Missouri
Brakeman
Posts:90
Send Message
| | 06/13/2008 9:24 PM |
| Try this place for good battery and charger prices. Just copy and paste this into your browser
http://www.all-battery.com | |
 | |
|
Madstang
1st Class Member
Bellevue, NE
Foreman
Posts:202
Send Message
| | 06/14/2008 12:29 AM |
| If you are using a battery car why not use the tool batts, like Milwaukee or DeWalt?
Battery packs are lack luster, if you don't use them they, for me hav a tendency to go bad...not my tool batts.
I have 2 Milwaukee 3 bay chargers and I just leave them on those untill I need them.....works better then any battery packs...I have 2 Triton chargers and I really don't like messing with them to charge the battery packs..the bays are much easier
I have Aristo Li-on batts in 4 of my tenders and right out of the box I have had 1 failure...so far..still they beat the battery packs you can buy...but this is MHO.
Bubba | |
Bubba'sPlatte River RRBellevue, NE | |
|
rpc7271
1st Class Member
Mesa, Az
Foreman
Posts:145
Send Message
| | 06/14/2008 4:24 PM |
| | I was looking at Home Depo and they have 2 packs of Ryobe 18 volt batteries for $44.95. The charger is $32.95. The only problem is I can't tell what kind of batteries they are. Probably nicads. | | | |
|
calenelson
Non-Paying Member
Foreman
Posts:392
Send Message
| | 06/14/2008 4:44 PM |
| if they are yellow..they are NiCad...
they are making some Lio---something nowadays as well!
the Yellow ones work really good-I have a large Ryobi Set! I'm surprised they don't have a fathers day drill special with battery and charger for about $40... | |
‘Course he isn’t safe. But he’s good. He’s the King I tell you. | |
|
rpc7271
1st Class Member
Mesa, Az
Foreman
Posts:145
Send Message
| | 06/15/2008 2:42 PM |
| | They have all sorts of specials on Ryobi tools but I HATE Ryobi tools. Besides I already have 3 battery drills & don't think i need another one. | | | |
|
ralphbrades
Village of Winster, Peak District, Derbyshire, UK
Foreman
Posts:178
Send Message
| | 06/15/2008 11:38 PM |
| Why don't you simply try some good old fashioned Sealed Lead Acid batteries? The one I use is a 6 Volt 4.5 Ah brick that costs me £4.99 each, (or £15.00 for four). The charger was about £7 and it us just a big plug with two fly leads.
regards
ralph | |
The Home of Articulated Ugliness | |
|
calenelson
Non-Paying Member
Foreman
Posts:392
Send Message
| | 06/16/2008 6:51 AM |
| Posted By rpc7271 on 06/15/2008 2:42 PM
They have all sorts of specials on Ryobi tools but I HATE Ryobi tools. Besides I already have 3 battery drills & don't think i need another one.
ok, so then I'm not really sure why you asked about their batteries? My above suggestion was mentioned only to allow that one "could" purchase the "promo drill set" to obtain at least one charger and battery(toss the included drill to the side, or use as a track sweeper)...then if one needed another battery (to make a set of 2 as you mentioned above)it could be purchased alone all for less than the 2 battery "pack" and a single charger combined...
good luck | |
‘Course he isn’t safe. But he’s good. He’s the King I tell you. | |
|
Spule 4
2nd Class Member
Foreman
Posts:482
Send Message
| | 06/16/2008 7:57 PM |
| Interesting stuff.....here is why:
I have a big comparison study including a chart of rechargable batteries for something I am doing at work now (some neat stuff coming as far as batteries folks). Some real life (thousands of units studied nationwide) on all types of batteries NiCd, Li-ion, NiMH, etc including charge cycles, overall life, impact of hot and cold, impact of over charging and over discharging) studies and pros and cons. From what I saw today, NiCd for our use (charge cycle being a factor and overall life) is the best.....for now.
....and some drawbacks of the race for more power means old batteries that lasted 8 years are gone and 18mo to 2 years are now the norm..... Or what I am having to tell the folks in purchasing.....:o | |
Garrett
"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium." | |
|
Del Tapparo
1st Class Member
Fort Collins, Colorado
Foreman
Posts:208
Send Message
| | 06/16/2008 8:03 PM |
| Posted By Spule 4 on 06/16/2008 7:57 PM
From what I saw today, NiCd for our use (charge cycle being a factor and overall life) is the best.....for now.
Data please ... | |
G-Scale Graphics
Custom Vinyl Lettering & Simple Low Cost Battery Power
www.GScaleGraphics.net | |
|
Stan Cedarleaf
1st Class Member
Dewey, AZ
Foreman
Posts:479
Send Message
| | 06/16/2008 11:05 PM |
| Posted By ralphbrades on 06/15/2008 11:38 PM
Why don't you simply try some good old fashioned Sealed Lead Acid batteries? The one I use is a 6 Volt 4.5 Ah brick that costs me £4.99 each, (or £15.00 for four). The charger was about £7 and it us just a big plug with two fly leads.
regards
ralph
Ralph, I couldn't agree more with you about the good old fashioned Sealed Lead Acid Batteries. Gel cells....
Heavy...... yes
inexpensive....... yes 12 volt 4.5/5 amp hour brick.... less than $20 each
reliable....... yes I've used many for more than 5 years with continuous cycle charging
easy to charge........ yes Walmart 1.5 amp charger.... $18.00
long run time.......... yes 3-6 hours
heavy duty running......... yes Most pulling long 15+ car trains...
mounted in battery car with interchangeable cells for continuous running.... yes
I run 12 volt 4.5 and 5 amp hour bricks, wired in series to 24 volt and get 4-6 hours of continuous run time with TE, with an LGB ALCO pulling 18 Bachmann boxcars and a caboose.
Ohter applications.... battery car, TE, Sierra sound, 2 Aristo U-25's. both powered, 2-3 hours continuous running. Continuous running is defined by turn it on and let it run until it stops. With little or no switching.
That's just the type of running I do.....
Oh yeah... I do use 2 and 4 cell Li-ion (7.2 and 14.4 volt) packs for my smaller LGB and Hartland powered locomotives. Run time.... 4-6 hours and more.
Confusing, isn't it.... 
| |
 
Dewey, AZ
Cedarleaf Custom Railroad Decals | |
|
rpc7271
1st Class Member
Mesa, Az
Foreman
Posts:145
Send Message
| | 06/17/2008 11:52 AM |
| | I got a Ryobi 18 volt charger for $30.00 and a 3 battery set for $50.00. I could have gotten a a hammer drioll with battery and charger for $70.00 but what to do with the drill after I steel the battery from it? Sell it on ebay without the battery? Then I would need another battery. The only thing I don't like about Nicads is the memory thing and having to runn them till they die. Haven't started in with the batteries yet, still gutting my loco. | | | |
|
TonyWalsham
Melbourne Vic Australia
Foreman
Posts:295
Send Message
| | 06/17/2008 5:59 PM |
| Posted By rpc7271 on 06/17/2008 11:52 AM
I got a Ryobi 18 volt charger for $30.00 and a 3 battery set for $50.00. I could have gotten a a hammer drioll with battery and charger for $70.00 but what to do with the drill after I steel the battery from it? Sell it on ebay without the battery? Then I would need another battery. The only thing I don't like about Nicads is the memory thing and having to runn them till they die. Haven't started in with the batteries yet, still gutting my loco.
If your only experience with NiCd batteries is with rapid charging drill batteries then, yes, the dreaded "memory" effect can happen.
It is caused by rapid charging partially discharged batteries. Eventually the battery will only allow a small charge into the pack.
Charging NiCd batteries with a conditioning charger such as those made by Maha will stop it happening.
They can correctly discharge the pack automatically and then charge the pack correctly.
I much prefer to charge NiCd batteries with the normal 10% rate for 14 hours then the, so called, "memory" effect NEVER happens. Consider it like filling a bucket with a fire hose at full pressure. Looks full after a few seconds but it isn't really. Dribble it in over a few hours and the pack is much fuller.
You can even leave the NiCd's on a trickle charge all the time with no ill effects.
I much prefer NiCd to NiMh for a number of reasons.
Primarily because they usually have twice the recharge cycle capability compared to NiMh. In plain English they last twice as long.
Also NiCd batteries do not self discharge as rapidly as NiMh do. That is mostly the reason why Sanyo no longer make AA size NiMh cells. They changed the chemistry to a mixture of NiMh and Alkaline and now guarantee their AA size cells to hold 85% of their charge for 1 year. | |
Best wishes,
Tony Walsham
Remote Control Systems. www.rcs-rc.com/
Evolution Radio Control. www.evo-rc.net/
The primary problems of the planet arise not from the poor, for whom education is the answer. They arise from the well educated - for whom self interest is the problem. William Sloane Coffin. | |
|
Spule 4
2nd Class Member
Foreman
Posts:482
Send Message
| | 06/17/2008 6:12 PM |
| Posted By TonyWalsham on 06/17/2008 5:59
I much prefer NiCd to NiMh for a number of reasons.
Primarily because they usually have twice the recharge cycle capability compared to NiMh. In plain English they last twice as long.
Also NiCd batteries do not self discharge as rapidly as NiMh do. That is mostly the reason why Sanyo no longer make AA size NiMh cells. They changed the chemistry to a mixture of NiMh and Alkaline and now guarantee their AA size cells to hold 85% of their charge for 1 year.
Tony, Del, et al:
These are the same as the findings of the study I mentioned above at work, charge life of the thousands Vs. hundreds, more stable in storage, longer running, etc. Guess it applies to trains too, and what I will consider when it comes time to battery power my choo choos.
Your charger comments are one of the items we are contending with at work, people not dis-charging, over dis-charging, over charging, short vs. long charing, leaving/storing batteries in the hot/cold, etc. All killers over time.
Reportedly, either a good charger like you mention Tony or, if that does not work, a few cycles of full discharge/recharge will supposedly break the memory.
The other comment in the study was how to test for dead cells, if you (right after charge) 1VDC or more lower than the rating of the full pack, you have a dead cell. Over dis-charging is one cause of dead cells reportedly.
Interesting stuff! | |
Garrett
"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium." | |
|
craigcoffman
Brakeman
Posts:37
Send Message
| | 06/17/2008 6:57 PM |
| I've been using the ryobi batteries 'cause they are so darn cheap ($40.00 for 2 of the 18V ones), & cause I already had the charger. I do give them a deep discharge each time, & occasionaly a further, deeper discharge by hooking up a lightbulb to them & letting that run for a while.
I have been taking the batteries out of the case though, so that they will fit in a boxcar or stock car.
Batteries as purchased:
after being removed from the case:
I cut the tabs connecting the battery on top of the pack & move down with the rest & solder on new jumper wires & a four-pole computer power connector (I used these cause I had a lot of them around).
I then use one of the empty cases with the opposite gender computer power connector so that I can charge these packs using the supplies Ryobi charger without modifying it.
 | | | |
|
TonyWalsham
Melbourne Vic Australia
Foreman
Posts:295
Send Message
| | 06/17/2008 7:12 PM |
| Garrett.
I have been using all sorts of batteries in Large Scale trains for over 20 years now.
My comments are based on my experiences in that time.
One thing you should remember is that if you discharge a battery too much a "smart" charger may not be able to detect the surface voltage and therefore not be able to charge it.
Don't let a NiCd or NiMh battery run down too flat in the loco. As soon as the loco starts to slow replace or recharge the battery pack.
I have my own tricks for rejuvinating NiCd battery packs that have developed a memory.
I simply zap the pack for a few seconds on an old LGB starter set controller would up to full speed. Proper polarity of course. Then charge the pack, discharge it, zap it a again and then recharge again. They usually come back to life just fine.
Your data about relative battery life is born out by the Sanyo battery service manual. A very useful document. | |
Best wishes,
Tony Walsham
Remote Control Systems. www.rcs-rc.com/
Evolution Radio Control. www.evo-rc.net/
The primary problems of the planet arise not from the poor, for whom education is the answer. They arise from the well educated - for whom self interest is the problem. William Sloane Coffin. | |
|