| You are not authorized to post a reply. | |
|
| Author | Messages | |
Skip
Ontario, Canada
Foreman
Posts:172
Send Message
 | | 07/06/2008 6:01 AM |
| | I'm contemplating picking up an Aristo remote switch receiver (I use TE track power, but can power the switch receiver separately)to drive a couple of USA #6 turnouts and am wondering if anyone has done this adaptation. I'm assuming all you do is remove the switch actuator box, but then I notice there is a 4 pin edge card connector to the track. Can the TE box feed the switch what it needs? | |
Paul
Greensville-Crook's Hollow Railway Company
building the finest mongrel short line in S. Ont.
| |
| Dan Pierce
1st Class Member
South Eastern MA, USA
Foreman
Posts:336
Send Message
| | 07/08/2008 5:50 AM |
| The Aristo receivers (55474 and 55475) can be used for LGB EPL drives as well as Aristo drives.
I am not sure of the current draw of the USA switch, it may be more than the Aristo unit can handle.
| | | |
|
| | You are not authorized to post a reply. |
|
| |
ActiveForums 3.7 |
|