David Fletcher
Moderator
Melbourne Australia
Foreman
Posts:128
Send Message
 | | 05/30/2008 5:33 PM |
| Fantastic! You have finished a big project over much time and changes! From BBT to laser cut chassis, new wheels from Rich and Jim, and all has come together to a nice running locomotive.
Does she run well? I hope she runs as good as she looks. Very well built.
Onto the Porter now!
Many thanks for the photos, I shall keep them in my Mason folder and add them to the finished Mason Bogie Gallery.
Thankyou so much Hans J
David. | |
(click here for my web page) | |
|
chuckger
1st Class Member
Foreman
Posts:120
Send Message
| | 05/30/2008 5:36 PM |
| Hi Hans,
Congratulations on a very nicely done bogie.
chuckger | | | |
|
Rich Schiffman
1st Class Member
Conroe, Texas
Brakeman
Posts:48
Send Message
| | 05/30/2008 5:59 PM |
| Hans,
Your Bogie is another jewel. You have combined talent to mate the laser cassis, wheels and topped it of with a great finish. Well done. | |
Rich Schiffman
dartco381@consolidated.net | |
|
alcashj94
1st Class Member
Devon, U.K.
Brakeman
Posts:11
Send Message
| | 05/31/2008 5:02 PM |
| Well done Hans! That looks like a fine job! Good to see another one done.
I count that as ten completed now and the early version seems to be the most popular although with a fair mix of liveries - be interesting if the ratio changes if any more get finished.
Come on you guys with part built models - there is plenty of proof in those finished models that chassis can be done easily. If you do not have the confidence to start why not use the pdf's and some wheels just to make a simple plastic chassis so you can assemble the parts you have already made? At least you would be able to push it along!
Allan. | | | |
|
viereka
Brakeman
Posts:15
Send Message
| |