Sourdoh
1st Class Member
Peoria, AZ
Brakeman
Posts:49
Send Message
 | | 07/04/2008 1:31 PM |
| | Just say it's the Munchkin World Tour. | |
~ "Never Ask Permission, Only Forgiveness" | |
|
Rayman4449
Gardner, KS
Foreman
Posts:467
Send Message
| | 07/05/2008 7:24 AM |
| Great job on the people Nick, I'll bet it looks lots better!
Raymond | |
Want MTH DCS Protosound 2 in a non-MTH engine? I can help.
www.rayman4449.dynip.com
| |
|
NTCGRR
1st Class Member
Nebraska City NE
Conductor
Posts:833
Send Message
| | 07/05/2008 8:39 AM |
| | can we see a side view looking in please? | |
 Marty Cozad
North Table Creek GRR
Nebraska City, NE
Is it "REAL" or just 1:29 th | |
|
Rayman4449
Gardner, KS
Foreman
Posts:467
Send Message
| | 07/06/2008 12:07 AM |
| I know I've mentioned this before but while you have each heavyweight top off add more hot glue to the light socket bases to make very sure they don't come loose, I had a SECOND Heavyweight almost go up in smoke because a light base came loose and shorted out across the two power wires that go across the top of the car tonight! Fortunately it was in a car that had voltage regulation circuitry I added so it only blew the regulator.(it literally exploded) In the last car this happned to I didn't have regulation and it completely melted all the wiring and switch and had to completely disassemble the car.
More hot glue on these light bases is needed at the factory on the heavyweights.
Since I can't get all the heavyweight tops off, it looks like I may need to just add resetable poly fuses on the bottom power leads going from the truck pickups to the car to help ensure I don't have future damage cause of more bases coming loose. 
Raymond | |
Want MTH DCS Protosound 2 in a non-MTH engine? I can help.
www.rayman4449.dynip.com
| |
|
nick s.
1st Class Member
Upstate NY
Conductor
Posts:647
Send Message
| | 07/07/2008 3:23 PM |
| Posted By NTCGRR on 07/05/2008 8:39 AM
can we see a side view looking in please?
i have the pictures you wanted, just having computer problems uploading them, will get them up soon..
Nick | | | |
|
nick s.
1st Class Member
Upstate NY
Conductor
Posts:647
Send Message
| | 07/15/2008 7:05 PM |
| Posted By NTCGRR on 07/05/2008 8:39 AM
can we see a side view looking in please?
side shot of cars....
| | | |
|
Rayman4449
Gardner, KS
Foreman
Posts:467
Send Message
| | 07/16/2008 10:55 AM |
| Ok, that looks REALLY good! Great choice of how to show them off too.
Raymond | |
Want MTH DCS Protosound 2 in a non-MTH engine? I can help.
www.rayman4449.dynip.com
| |
|
nick s.
1st Class Member
Upstate NY
Conductor
Posts:647
Send Message
| | 07/19/2008 7:12 PM |
| Thanks Ray, thought it would look cool with a video like this...the NYC is getting a lot of money on this trip, almost a sold out train.. he he he 
Nick.... | | | |
|
Mark L Horstead
1st Class Member
Brakeman
Posts:14
Send Message
| | 07/20/2008 11:08 AM |
| | I saw one move... | | | |
|
NTCGRR
1st Class Member
Nebraska City NE
Conductor
Posts:833
Send Message
| | 08/01/2008 6:33 PM |
| | I wondered if he put one in the bathroom? | |
Marty Cozad
North Table Creek GRR
Nebraska City, NE
Is it "REAL" or just 1:29 th | |
|
nick s.
1st Class Member
Upstate NY
Conductor
Posts:647
Send Message
| |