RCSRC

 | 

Thursday, November 20, 2008   You Are Here: Forums

 


Subject: Hartford Products
RSForum
Forum sponsored by:One to Twenty Point Me
 
Prev Next
You are not authorized to post a reply.
Page 1 of 212 > >>
AuthorMessages
wslogger15User is Offline

Passenger
Passenger
Posts:3

Send Message
07/14/2008 8:09 AM  
I know this has come up before but does anyone know the current status of Hartford Products? I can't get them to respond to phone calls and emails.
jimtypUser is Offline
1st Class Member
Centennial, CO
Conductor
Conductor
Posts:720

Send Message
07/14/2008 9:23 AM  
I've had some difficulties getting through myself at times. Phone seems to work best, but I'd keep calling until I actually talked to someone, leaving messages doesn't work so well.

livin' la vida loco
tbugUser is Offline
1st Class Member
Foreman
Foreman
Posts:131

Send Message
07/15/2008 4:23 PM  
I have lost faith in Hartford. No response and no follow-up even after TALKING to them (which was difficult at best) about the inability to deliver parts ordered back in December. Ended up going elsewhere to get the needed parts.
jebouckUser is Offline

Spokane Valley Wa
Brakeman
Brakeman
Posts:55

Send Message
07/15/2008 6:40 PM  
Same here.
No responses.
Not a good way to run a company. And I'm not alone with my observations.
jb
Jerry BarnesUser is Offline
1st Class Member
Lexington, NE
Conductor
Conductor
Posts:975

Send Message
07/15/2008 7:34 PM  
Too bad, was a good outfit, back in Bob's days. Jerry

Life is too short to take seriously.
KovacjrUser is Offline
1st Class Member
Lakewood NJ
Foreman
Foreman
Posts:295

Send Message
07/15/2008 7:35 PM  
I have been in the same boat....I'll never buy or recommend again


Jason Kovac
Lakewood, NJ
Spule 4User is Offline

2nd Class Member
Foreman
Foreman
Posts:482

Send Message
07/16/2008 2:54 PM  
I tried calling a couple times this and last week on an order made in early June that I was told would be out in two weeks.... I get no answer, and left a message (no actual greeting) with no call back.

A shame, they apeared to have a nice range of stuff....

Garrett

"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium."
wslogger15User is Offline

Passenger
Passenger
Posts:3

Send Message
07/16/2008 3:06 PM  
Well I guess I am not alone in getting no response from this company. It is a shame that this great company that Bob Hartford started seems to be having troubles. I just wish they would reply to my numerous attempts to contact them. I really want to order from them because the stuff they sell is not offered by anyone else.
CCSIIUser is Offline

Norman Oklahoma
Foreman
Foreman
Posts:173

Send Message
07/16/2008 3:24 PM  
Check out:

http://www.cocry.com/Merchant2/merchant.mvc?Screen=SFNT

They carry Hartford
Spule 4User is Offline

2nd Class Member
Foreman
Foreman
Posts:482

Send Message
07/29/2008 3:55 PM  
Well, three messages left by me this month (with no real greating, just the automated system) and still no calls back. I checked, my card has not been billed, so I guess no kit for me.

Garrett

"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium."
IrontonUser is Offline
1st Class Member
Northwest Indiana
Brakeman
Brakeman
Posts:38

Send Message
07/31/2008 7:06 AM  
C&OCRY has posted that they are unable to get through to Hartford also. Their post says they have removed Hartford from their catalog until the matter is cleared up. So the above link willnot get you any information either.

Rich Black
SA #269
jebouckUser is Offline

Spokane Valley Wa
Brakeman
Brakeman
Posts:55

Send Message
08/03/2008 12:50 PM  
I'm sure someone at HF has read this thread. Why don't they pony up and tell us if they are in or out of business?
livesteam5629User is Offline
1st Class Member
Elkton, MD
Foreman
Foreman
Posts:128

Send Message
08/03/2008 1:18 PM  
Back in May I called and Jeramia answered the phone. Told him I had a bad casting on truck part for my DSP&P waycar. "No problem. We will get one out to you next week" (this being Monday 12 May to be exact) Also ordered the interior kit for this car and told him I was missing facia boards. To date NOTHING after at least 4 more calls. All kind of excuses such as casting machine kaput etc etc. I am now making up a pattern for the bad truck part and will cast my own. Facia boards I can scratch. Same for interior. Sigh! Wanted more DSP&P cars over time but not now. Really very sad.
Noel
PS How in the heck do you do spell check on this site without standing on you head and etc. Shad...add spell check for us spelling impaired.
PPS Anyone have a couple pair of DSP&P Swing motion trucks by Hartford they want to part with. Contact me off line. Thanks
Noel

Noel Crawford
Spule 4User is Offline

2nd Class Member
Foreman
Foreman
Posts:482

Send Message
08/03/2008 1:58 PM  
Funny, I was told that the casting machine was down but would be back on line and why my kit would be delayed two weeks......

Garrett

"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium."
gary ArmitsteadUser is Offline
1st Class Member
Burbank, CA
Foreman
Foreman
Posts:411

Send Message
08/04/2008 8:20 AM  
You might want to look at this link regarding the situation at Hartford Products. Doesn't look good.:O

http://120pointme.blogspot.com/


Gary Armitstead
Los Angeles Live Steamers
SA #4449
Spule 4User is Offline

2nd Class Member
Foreman
Foreman
Posts:482

Send Message
08/04/2008 5:17 PM  
I wonder what the "far reaching effects" are? Like the LGB saga, we have to wait a week......

Garrett

"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium."
SlateCreekUser is Offline

Foreman
Foreman
Posts:248

Send Message
08/04/2008 8:22 PM  
It's up. You won't like it.

Visit the Slate Creek Railway website!
Spule 4User is Offline

2nd Class Member
Foreman
Foreman
Posts:482

Send Message
08/04/2008 8:36 PM  
Posted By Spule 4 on 08/04/2008 5:17 PM
Like the LGB saga, we have to wait a week......




....or maybe not.

Garrett

"She'd been in Belgium, she told me...Studying the pyramids. It took her years to find out that there were no pyramids in Belgium."
gary ArmitsteadUser is Offline
1st Class Member
Burbank, CA
Foreman
Foreman
Posts:411

Send Message
08/04/2008 9:00 PM  
That IS sad.:(
It looks like this will have far-reaching effects in the 1/20.3 stuff.


Gary Armitstead
Los Angeles Live Steamers
SA #4449
beyond.logicUser is Offline

Passenger
Passenger
Posts:2

Send Message
08/10/2008 7:31 PM  
Has anybody else noticed the Hartford Products ad in June Garden Railways Market Place (page 125)? Says Hartford Products is for sale - they are retiring. Hopefully we'll hear if/when someone buys the business.
You are not authorized to post a reply.
Page 1 of 212 > >>

Forums > Forums > Rolling Stock > Hartford Products



ActiveForums 3.7
Terms Of Use | Copyright 2007 by myLargescale.com/Model Railroads Online, LLC  | Privacy Statement