Aristo Clearance
 | 
Friday, January 09, 2009   You Are Here: Forums

 
Forums > Forums > Live Steam
Subject: Regner Lumberjack
Forum Sponsored By: Quisenberry Station
Forum Sponsored By: Quisenberry Station		 
Prev Next
You are not authorized to post a reply.
AuthorMessages
Dave SykesUser is Offline
1st Class Member
Auburn WA
Passenger
Passenger
Posts:8

Send Message
10/29/2008 5:30 PM  
  Now that the dollar is getting well. I would like to get some URLs
from folks that sell them. A while back some one had kits for about
$900.
Dave Sykes PFRR
dhamer52User is Offline

Virginia Beach, VA
Brakeman
Brakeman
Posts:25

Send Message
10/29/2008 5:48 PM  
Give Ken Johnson a call.  He's the Regner dealer in the states.  Here's his website;  http://www.traindept.com/   He may even have one in stock.
 
Dan Hamer
SA #823
Gnome Valley RailRoad
slimgaugeUser is Offline
1st Class Member
Passenger
Passenger
Posts:7

Send Message
10/30/2008 12:51 PM  
That's where I got mine.  I bought the kit, rather than RTR.  I've put it together, but I haven't tried to fire it yet.
Nick JrUser is Offline

Brakeman
Brakeman
Posts:62

Send Message
10/31/2008 2:50 AM  
Slim, the directions are absolutely correct.  The first couple of times fired up it will run very badly, don't be discouraged.  Each time it is run the cylinders will seat better and better and after about 6 times (the directions say 10) it will start up by itself and keep steaming on only about 10 lbs of pressure.  I really enjoy watching mine.                                                                                          Nick Jr
Pete ThorntonUser is Offline
1st Class Member
Annapolis, MD
Conductor
Conductor
Posts:628

Send Message
11/02/2008 1:05 PM  
I really enjoy watching mine

Yes, they are cute and fun to watch.
HMeinholdUser is Offline

Fremont,CA
Foreman
Foreman
Posts:104

Send Message
11/02/2008 2:54 PM  
If you are adventurous, you can try this modification of the Lumber Jack (see near the end of the thread):

http://www.buntbahn.de/modellbau/viewtopic.php?t=7796&highlight=friedel

Regards
Henner
Donkey Doctor East Devils Hill Lumber Co.
Nick JrUser is Offline

Brakeman
Brakeman
Posts:62

Send Message
11/03/2008 6:00 AM  
That is some mod, a Cog RR.  The only thing I did to mine was add a timber and wood steps to the rear.  Also made a wood load from split twigs and replaced the Regner gas filler with a ronson just to keep them all the same.   Nick Jr
You are not authorized to post a reply.
Forums > Forums > Live Steam > Regner Lumberjack



ActiveForums 3.7
Terms Of Use | Copyright 2007 by myLargescale.com/Model Railroads Online, LLC  | Privacy Statement