Question re small metric nut/bolt drivers > Forums

Subject: Question re small metric nut/bolt drivers

Forum Sponsored By: Quisenberry Station

Email me when someone replies to this thread.

You are not authorized to post a reply.

Author

Messages

timhum

1st Class Member
Sudbury, Suffolk, UK

Brakeman
Posts:15

Send Message

09/24/2008 4:41 AM
I'm sure I saw a message on the forums recently for a supplier very small metric nut/bolt drivers, sizes under 2mm. Can't find it now, can anybody help - thanks Tim

Kovacjr

1st Class Member
Lakewood NJ
Foreman

Foreman
Posts:372

09/24/2008 5:16 AM
Not sure of metric but Micromark sells I think or it was listed inone of the mags and company that makes up to 0000-180 bolts and nuts. Fot just the drivers I have a set of Whia that goes to 1.2 or 1.7mm

Jason Kovac Lakewood, NJ

Charles

1st Class Member

Conductor
Posts:636

09/24/2008 6:11 AM
I believe you might fill your order here: http://www.wihatools.com/

Happy Trails on the Rails Offering services to enhance your steam locomotive Charles SA #614 http://cebednarik.googlepages.com/home

dwegmull

Palo Alto, California

Brakeman
Posts:51

09/24/2008 9:29 AM
(I guess the following is a bit off topic) If you ever find yourself stuck without the correct wrench, look in your scrap box for an Allen head screw that fits over the hex head. Attach some sort of handle to its threads (methods range from a nice turned handle screwed and locked in place to a wood dowel drilled and epoxied in place) and you have a "custom" hex driver. Note: to access some fastners you may need to turn down the Allen head... While not as durable as a commercial nut driver it may help you making progress on a late night project ;-)

Greetings, David Columbia Circle Line www.wegmuller.org

Spule 4

In The Dutch Mountains

Conductor
Posts:609

09/24/2008 4:53 PM
Check the RC airplane section of your LHS, where I bought mine...

Garrett

HMeinhold

Fremont,CA
Foreman

Foreman
Posts:104

09/24/2008 9:46 PM
Tim, try this link, as you are located in Europe: http://www.modellbauershop.de/assets/s2dmain.html?http://www.modellbauershop.de/index2.html Regards

Henner Donkey Doctor East Devils Hill Lumber Co.

timhum

1st Class Member
Sudbury, Suffolk, UK

Brakeman
Posts:15

Send Message

09/25/2008 2:53 AM
Thanks for the assistance everyone, the German site looks fascinating Henner Tim

You are not authorized to post a reply.

Forums > Forums > Live Steam > Question re small metric nut/bolt drivers