danielr49
1st Class Member
Brakeman
Posts:14
Send Message
 | | 09/09/2008 3:23 PM |
| | Which locktite are you to use on the S-2? Is it 222 or 222ms. What is the difference between the two? | | | |
|
Semper Vaporo
1st Class Member
Cedar Rapids, Iowa
Engineer
Posts:1536
Send Message
| | 09/09/2008 3:39 PM |
| Took me a while to figure out the difference between 222 and 222MS...
MS is the MIL-SPEC version and will cost 3 times as much.
Nice stuff, fur sure, but OUCH! Use the cheaper stuff. | |
 C. T. McCullough
Cedar Rapids, Iowa
Le 18:22
| |
|
GNSteamer
Brakeman
Posts:98
Send Message
| | 09/10/2008 1:15 PM |
| | The plain Loctite222 in the red plastic bottle | | | |
|
vsmith
1st Class Member
SoCal
Engineer
Posts:1193
Send Message
| | 09/10/2008 2:39 PM |
| I thought you were going to ask how to get a thread locked on the forum...just ask about the LGB backruptcy, Bachmann testing practices, Aster vs Accucraft or posting something with a political bent, thats sure to get the thread locked... " border=0>
For the other stuff, Loctite is good stuff, if your doing maintanence and need to remove the screws be sure to use the workable loctite as the permanent stuff really IS permanant. | |
 Kitbashing, welcome to the Dark Side | |
|
tacfoley
1st Class Member
Conductor
Posts:575
Send Message
| | 09/14/2008 6:51 AM |
| 222 as recommended by Aster, or something else NOT recommended by Aster.
Your choice.
tac | | | |
|