LS Porter Masterclass > Forums

Subject: LS Porter Masterclass

Forum Sponsored By: Quisenberry Station

Email me when someone replies to this thread.

You are not authorized to post a reply.

Author

Messages

Kovacjr

1st Class Member
Lakewood NJ
Foreman

Foreman
Posts:295

04/25/2008 7:18 PM
Had a bit if time on my hands to I took the opportunity to make some chips. Here is one good and one bad stack for my pair of locos in the works. Of course they are based on the profile of Fletch's drawings and I screwed up the first one and the lower section had a 27 degree angle the secone had a 25 degree..Just have to turn out another. It was turned from a solid 2" aluminum round and has a 1" deep recess on the top for the screen dome and cap for the Cogdon stack. Hopefully you will get that Cogdon steam flow from the stack and have that real wide plume. I guess I have a spare stack for the scrap box for another loco. The left one of the correct one the right one is the spare

Jason Kovac Lakewood, NJ

You are not authorized to post a reply.

Forums > Forums > Live Steam > LS Porter Masterclass