bobh5
1st Class Member
Passenger
Posts:2
Send Message
 | | 02/28/2008 2:25 PM |
| I have just bought a ;new accucraft Magul from Dave Hottmann which he had put his personal touch on it. It strated very easy and it is easy to set it a t a slow speed and do not have to keep ajusting the setting. I just ran it pull 6 heavy rock cars loaded with rock and it had no trouble pulling them. It ran for about 25 minutes and all I did was watch it run. If your a looking for and easy running engine It would be the one
Bob | | | |
|
Kovacjr
1st Class Member
Lakewood NJ
Foreman
Posts:372
Send Message
| | 02/28/2008 7:27 PM |
| | Keep in mind your loco is bored out to 3/4" cylinders vs the orignal 9/16" That makes a huge difference in pulling and slow speed operations..Congrats on the loco it has a lot of mods to make it better. | |
Jason Kovac
Lakewood, NJ | |
|
Jerry Barnes
1st Class Member
Lexington, NE
Engineer
Posts:1142
Send Message
| | 02/28/2008 8:38 PM |
| Hey Bob,
Good to see you make a post! Could uploading pictures be next? SHould be able to do it, with that new Apple computer! Jerry | |
Life is too short to take seriously. | |
|