RCSRC

 | 

Thursday, January 08, 2009   You Are Here: Forums

 


Subject: Big steam power on Santa Fe
Prev Next
You are not authorized to post a reply.
AuthorMessages
noelwUser is Offline
1st Class Member
Rio Linda, Calif. 95673
Foreman
Foreman
Posts:233

Send Message
10/07/2008 10:19 PM  
I was going thru some old Santa fe photo looking for some Eng.'s to model and found this one.. I didn't know Santa fe has that large of power. 
 
I wonder where it ran/operated at???
 
 
Can't believe Santa fe had that large of a Eng.     
and nothing ever mention of it that I know of..
 
 
The photo is a org. Santa fe photo and has this typed on the back of the photo..
 
" One of the ten 2-10-10-2, or Mallet type, freight locomotives constructed in 1911 by joining two 2-10-2 or Santa fe type locomotives together.  They have  a tractive force of 111,600 lbs.,A wheel base of 103 feet and a total length with out tender of 120 feet.  Commencing in 1915 they were converted to Santa fe or 2-10-2  type freight locomotives."
 
 
Noel



Rio feather says...One leave train running here and take coffee break may find Koi fish checking out how deep an Engine can swim when swing bridge is left open. It happen to Big Feather Tweedledum.
Photo Album
Greg ElmassianUser is Online
1st Class Member
Carlsbad (San Diego), CA
Engineer
Engineer
Posts:1629

Send Message
10/07/2008 10:37 PM  
I have actually held a brass model of this in HO in my hands. They could not keep them in steam, and eventually split them back to 2-10-2 locos as you said.

Regards, Greg


Be sure to visit my site, lots of technical tips and modifications, and you can search for topics and key words.
Click here for Greg's web site
Richard SmithUser is Offline
1st Class Member
Port Orford, Oregon
Foreman
Foreman
Posts:489

Send Message
10/07/2008 10:45 PM  
The 2-10-10-2's were used between Bakersfield and Barstow and up to San Bernardino. They only lasted about six years before being dismantled and rebuilt into regular 2-10-2's. The tenders survived intact for many years used behind some of the 2-10-2's. I once saw an old silent movie on TV that took place on the Santa Fe in which a 2-10-10-2 took part. In fact there was a fight staged on top of it. I wish I could remember the name of the movie as it's the only time I've ever seen film of a Santa Fe 2-10-10-2 in action.

Santa Fe tried a number of innovations including using flexible boilers. Articulateds were not successful on the Santa Fe and except for a few ex-N&W mallets used during WWII were not used after the very early years of the twentieth century.

Greg ElmassianUser is Online
1st Class Member
Carlsbad (San Diego), CA
Engineer
Engineer
Posts:1629

Send Message
10/07/2008 10:53 PM  
If I am not mistaken, this loco did have one of those flexible boilers, with the flex in the middle, where the large band is... right? That's the reason for the big pipes right?

I also seem to remember seeing some locos with "corrugations" in the middle of the boiler... or maybe I am having a flashback.

Regards, Greg


Be sure to visit my site, lots of technical tips and modifications, and you can search for topics and key words.
Click here for Greg's web site
Richard SmithUser is Offline
1st Class Member
Port Orford, Oregon
Foreman
Foreman
Posts:489

Send Message
10/07/2008 11:11 PM  
Greg,

To be honest I don't recall if the 2-10-10-2 had a flexible boiler or not. I don't believe so. I do know that they had a fleet of 2-6-6-2's with flexible boilers and a 4-4-6-2 that possibly had one. The flexible boilers were of course a maintenance headache.

Steve StockhamUser is Offline
1st Class Member
Foreman
Foreman
Posts:392

Send Message
10/08/2008 11:37 AM  
  The Santa Fe shop guys were masters of innovation! Whereas many "innovations" leading to our modern steam engines were thought to be the work of Baldwin and the other manufacturers, the shops of the various railroads (particularly the ATSF) were almost as influential! I have a fascinating book on the locomotive design and innovations of the Santa Fe (complete with some really awesome photos!) that goes into quite some detail on this subject.

You are not authorized to post a reply.
Forums > Forums > Railroad Operations > Big steam power on Santa Fe



ActiveForums 3.7
Terms Of Use | Copyright 2007 by myLargescale.com/Model Railroads Online, LLC  | Privacy Statement