Del Tapparo
1st Class Member
Fort Collins, Colorado
Foreman
Posts:249
Send Message
 | | 08/24/2008 4:50 PM |
| A fellow club member posed this question at the last meeting. Anyone know the derivation of this term?
Trestle Bent | |
G-Scale Graphics
Custom Vinyl Lettering & Simple Low Cost Battery Power
www.GScaleGraphics.net | |
|
SteveC
Moderator
Engineer
Posts:1009
Send Message
| | 08/24/2008 5:32 PM |
| Del
I would venture to say that the term 'bent' came from a much earlier time, back in in the days when timber frame construction was the preferred method of construction, reaching it's maturity around the 1400's.
Bent: Structural network of timbers or a truss that makes up one cross-sectional piece of the frame. | | | |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1908
Send Message
| | 08/25/2008 6:39 AM |
| | Haven't had much luck finding the entymology of "bent" except perhaps "stiff grass." | |
 One king held the frankincense,
One king held the myrrh,
One king held the purest gold,
One King held the hope of the world.
-- Point of Grace | |
|
Paul Burch
1st Class Member
Gig Harbor Washington
Foreman
Posts:217
Send Message
| | 08/25/2008 8:23 AM |
| Here is one more dictionary definition.
a transverse framework (as in a bridge) to carry lateral as well as vertical loads
Doesn't define the origin though. | |
Paul Burch
Sierra Cascade & Pacific R.R. | |
|
SteveC
Moderator
Engineer
Posts:1009
Send Message
| | 08/25/2008 11:01 AM |
| While nothing more than my own reasoning.
One method of timber framing that was certainly contemporary with, and most likely predated box-frame methods (i.e. post & beam and bent-frame styles) was 'cruck' timber framing. Which used trees that had natural curves within their growth and used this characteristic to make matched pairs (i.e. right & left blades), creating rough arched A-frame type trusses. As would be expected, with an increase in population which in turn increased demand for more structures. The 'cruck' method of timber framing quickly ran out of suitable trees, not to mention that similar methods were also used in shipbuilding too.
Anyway, 'cruck' is a variant of the word 'crook' which has as one of its definitions, describing an object that has a curve or bend in it, which is how I figure the term 'cruck' came to be used to describe that method of timber framing. Additionally, the term "crooking" was used to describe the process of bending wood.
Well, as the available supply of trees with natural curves decreased, some method needed to be found to use straight pieces of timber to accomplish the same thing that 'crucks' had. Thus the 'bent-frame' method of timber framing. Maybe, since the term 'cruck' specifically referred to the curved arch, they substituted the word 'bent'. | | | |
|
Del Tapparo
1st Class Member
Fort Collins, Colorado
Foreman
Posts:249
Send Message
| | 08/25/2008 11:43 AM |
| | Very interesting Steve. Thanks. | |
G-Scale Graphics
Custom Vinyl Lettering & Simple Low Cost Battery Power
www.GScaleGraphics.net | |
|
Richard Weatherby
1st Class Member
Maryland - USA
Foreman
Posts:192
Send Message
| | 08/25/2008 12:50 PM |
| Bent – (1) A group of two or more piles which support a trestle deck or falsework. A transverse framework to carry lateral as well as vertical loads. (2) A piece of lumber curved by lamination or steaming. (3) Land unenclosed and covered by grass or sedge, as opposed to wood, such as wasteland.
(Construction Dictionary, Phoenix Chapter NAWIC)
Bent - A supporting unit of a bridge comprised of two or more piles connected by a cap or another member. This connecting member distributes superimposed loads on the bent. When combined with a system of diagonal or horizontal bracing attached to the piles, the entire construction distributes its loads onto the foundation.
(York Bridge Concepts (YBC) is the nation's leading turn-key Timber bridge contractor.-Tampa, FL)
Bent - technical term for a bridge pier. Commonly referred to as a bridge column.
(The Texas Highwayman's Guide to The San Antonio Area Freeway System)
Bent — A transverse or longitudinal line of structural framework composed of columns, girts, ties, and diagonal bracing members.
(Griswold Water Systems (GWS) was founded in 1994, in South Daytona, Florida)
Bent: The primary member of a steel building's structural system
(www.metalbuildingdirectory.com/)
Bent - The main member of a structural system.
(Associated Metal Components; 1201 Mac Arthur Ave. Harvey, LA 70058)
These "bent" frame structural members are terms of the industry and is the preferred terminology for glu-lam wood, metal buildings, and other structures with a "pre-fab" frame.
I like Steve's etymology. It sounds correct to me.
| |
Dickhttp://www.mdlsrs.com/MarylandCentral | |
|
flatracker
1st Class Member
Dunlap, TN
Foreman
Posts:150
Send Message
| | 08/25/2008 1:27 PM |
| Just to add a little history to part of what SteveC mentioned in relation to shipbuilding, the U.S. Navy owned a large tract of land across Mobile Bay(Eastern side) that had a lot of old live oaks. They have a tendency to grow heavy limbs out and then up, which made them ideal for rib and bow frames in the old large Navy sailing vessels. Many years ago, they still owned some of the land, though I doubt they do any more.
| |
Bob Martin | |
|
Marauderer
1st Class Member
Powder Springs, GA
Foreman
Posts:138
Send Message
| | 08/25/2008 1:54 PM |
| Gulf shores National Monument owned by the National Park service is located West of Pensacola on Mobile bay and it has a stand of live oaks that were used for ship building for the reasons you mentioned plus it was the most dense of wood weighing in at almost 80 lbs per cubic foot. I couldn't find the word bents used but you got the impression reading the articles that the limbs could have been called bents.
| |
Barry
BBKB RailRoad
VGR, GGRS | |
|
Ironton
1st Class Member
Northwest Indiana
Brakeman
Posts:45
Send Message
| | 08/26/2008 6:28 AM |
| Try this site:
http://www.yourdictionary.com/bend | |
Rich Black
SA #269 | |
|
Spule 4
In The Dutch Mountains
Conductor
Posts:608
Send Message
| | 08/26/2008 3:57 PM |
| "Camp Freddy, the whole world is bent"
-Charlie Croker | |
Garrett
| |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1908
Send Message
| | 08/27/2008 6:57 AM |
| | Hmm. All I can think of is "Thulcandara's bent eldil." | |
One king held the frankincense,
One king held the myrrh,
One king held the purest gold,
One King held the hope of the world.
-- Point of Grace | |
|
Rod Hayward
Foreman
Posts:120
Send Message
| | 08/27/2008 3:10 PM |
| Torby, you have to leave perelanda once in a while.....
Bye bye piebald | | | |
|
Torby
1st Class Member
North Chicago 'burbs.
Engineer
Posts:1908
Send Message
| | 08/27/2008 3:54 PM |
| | Feeling a little green? | |
One king held the frankincense,
One king held the myrrh,
One king held the purest gold,
One King held the hope of the world.
-- Point of Grace | |
|
vsmith
1st Class Member
SoCal
Engineer
Posts:1182
Send Message
| | 08/27/2008 5:07 PM |
| Why do they call it a "Bent"?
Why not? if they called it "thingamajig" they wouldnt get very far now would they...
 | |
 Kitbashing, welcome to the Dark Side | |
|
John J
Moderator
Conductor
Posts:908
Send Message
| | 08/28/2008 5:41 AM |
| Posted By vsmith on 08/27/2008 5:07 PM Why do they call it a "Bent"? Why not? if they called it "thingamajig" they wouldnt get very far now would they... " border=0>
\
DOOHICKY would't sail either | |
 | |
|