| Author | Messages | |
Semper Vaporo
1st Class Member
Cedar Rapids, Iowa
Engineer
Posts:1534
Send Message
 | | 08/13/2008 2:57 PM |
| A good friend and former co-worker... or is that a former friend and good co-worker... no, no, no, I was right the first time.. anyway, Jerry Buck sent me this photo that he found when going through his Dad's picture box. He says it was taken in Havelock, Iowa, but he doesn't know a date or any other info about it.
Looks much like someone took a hand cart and replaced the hand pump mechanism with a "hit 'n' miss" or a "one-lunger" type gas engine.
A model might make an interesting addition to a garden RR.
The wheels appear to be "press formed", where would one find something like that for a model?
Anybody know of a small gas engine that could be adapted to 'Garden' scale? Could one be made to run slow enough to look (and sound) right? |
|
 C. T. McCullough
Cedar Rapids, Iowa
Le 18:22
| |
| Spule 4
In The Dutch Mountains
Conductor
Posts:608
Send Message
| | 08/13/2008 6:07 PM |
| Ozark do a metal handcar wheel, not sure if cast or stamped.
Ertl did some small hit and miss motors, 1:16 or so if memory serves, not sure of smaller ones?
There are small operating ones tho...but not 1:24-1:20 as far as I know:
http://www.youtube.com/watch?v=5rLSkLv_SsM | |
Garrett
| |
| dana
Brakeman
Posts:66
Send Message
| | 08/14/2008 12:33 AM |
| sempr http://www.back2bay6.com has 16mm/gscale gas compressor engines
ID: 1AB2B603 STATIONERY ENGINE KIT
A whitemetal kit of a stationery engine. Can used in the workshop or as a wagon load. 15mm scale, ideal for G and 16mm modellers. dont know if this is any help | | | |
| Mik
Indiana, Pa
Foreman
Posts:423
Send Message
| | 08/16/2008 7:01 PM |
| Here's a fairly current pic of one of the EBT's Fairmont cars. These were 2 cycle water cooled engines, the vintage pic above appears to be an air cooled engine
 | |
Mik
Unsupervised children will be given espresso and a free puppy | |
|
| | You are not authorized to post a reply. |
|
| |
ActiveForums 3.7 |
|