Bill Swindell
1st Class Member
Martinez, CA
Foreman
Posts:234
Send Message
 | | 09/07/2008 9:48 PM |
| | I bought a heavily used stationary steam engine and boiler today. The boiler is about 3" in diameter. Does anyone have any suggestions on where to buy a sight glass assembly? I also want a pressure gauge and a valve that would be usable for a throttle. | |
Bill Swindell
Martinez, CA | |
|
Ray C.
Arcadia, Ca.
Passenger
Posts:7
Send Message
| | 09/07/2008 10:21 PM |
| | Cole's Power Models is a great place to start. | | | |
|
Ora Banda
1st Class Member
Melbourne, Australia
Passenger
Posts:1
Send Message
| | 09/08/2008 4:39 AM |
| | I just received some globe valves from Steam Fittings in the UK. Price was good, postage (to Australia) was reasonable, service was very efficient and the quality exceeded my expectations. Check them out at www.steamfittings.co.uk | |
Steam on!
John | |
|
Kovacjr
1st Class Member
Lakewood NJ
Foreman
Posts:367
Send Message
| | 09/08/2008 5:29 AM |
| | I would also use Coles. Their valves and such are beautiful cast bronze and are usually perfectly seated no leaking. I have used Steamfittings and the valves do not seat well. Seems to be all the ones I bought too. | |
Jason Kovac
Lakewood, NJ | |
|
SalM
1st Class Member
Tallahassee, Fl.
Brakeman
Posts:17
Send Message
| | 09/09/2008 5:36 AM |
| | He is a State side company that may have what you need....http://www.monahansteammodels.com/ | | | |
|
GaugeOneLines
Ottawa Canada
Brakeman
Posts:40
Send Message
| | 09/10/2008 7:55 AM |
| I have used Maidstone Engineering Services (now Maxitrak) in the UK for about 20 years now. They ship by return mail same day. They have sight glasses, pressure gauges and also a nice blower valve which you can use as a regulator, though it would be advisable to perhaps re-profile the cone to give you more control.
A highly recommended company to deal with, as well as fair prices. Visa/MC taken. Google their web site.
David M-K
Ottawa | | | |
|
redbeard
1st Class Member
Gonzalez, Florida (Pensacola area)
Foreman
Posts:126
Send Message
| | 09/10/2008 8:35 AM |
| Hi,
Sorry to chime in so late, I have been using The Steam Chest for my fittings etc. They are an "eBay store" . I have had nothing but good luck with them.
http://stores.ebay.com/id=163864292&ssPageName=STRK:MEFSX:SST
redbeard AKA Larry Newman SA #1956 | | | |
|